Mold Remediation Frisco TX |
Mold Removal Services
Mold Remediation Frisco TX starts with finding the water, not just scrubbing the stain. We inspect with moisture meters and infrared cameras, seal the work area behind 6-mil polyethylene, and run HEPA air scrubbers until air samples come back clean. Serving Frisco, Texas homeowners since 2017.
Mold Remediation Frisco TX built on proof, not promises
Frisco Mold Shield handles Mold Remediation Frisco TX homeowners can actually verify - moisture readings before and after, containment photos, and air sampling results you keep. We started in 2017 and have worked everything from 1990s Panther Creek two-stories to new-build slab homes in Phillips Creek Ranch. Most of our calls start the same way: a musty smell in a closet, a dark ring on baseboard drywall, or a stain that came back after the last wipe-down.
We are an IICRC-certified firm with Applied Microbial Remediation Technician (AMRT) and Water Damage Restoration Technician (WRT) credentials on staff, plus ACAC Council-certified Microbial Remediator oversight on larger losses. Our mold removal in Frisco crews carry Protimeter and Tramex moisture meters, FLIR thermal cameras, and borescopes to check inside walls before we cut anything. If you need a mold remediation company in Frisco, TX that documents every step, we are built for that.
Mold Remediation and mold removal services in Frisco
One crew handles the whole job: inspection, containment, removal, drying, repairs, and prevention. We do not hand you off to a third-party contractor halfway through. Every project in Frisco follows IICRC S520 remediation standards, and every material we use - from Concrobium and Benefect antimicrobials to Fiberlock coatings - carries an EPA-approved label. If you have been searching for a mold remediation company in Frisco, TX that stays on site start to finish, this is the lineup.
Residential Mold Remediation
Whole-home remediation for Frisco houses - attics, crawlspaces, bathrooms, laundry rooms, and wall cavities. We set a containment barrier system, run negative air machines, and HEPA-vacuum every surface before any antimicrobial goes down. Typical single-room jobs finish in one to two days.
Commercial Mold Remediation
Offices, retail, restaurants, and multi-family buildings around Stonebriar and the Dallas North Tollway corridor. We schedule after-hours so your doors stay open, document with air sampling pumps, and deliver a clearance report your property manager or insurer can file.
Black Mold Removal
Black mold growth usually means a water source that never got fixed. We locate it with a moisture meter and infrared thermal camera, remove mold-contaminated drywall and framing, then treat the cavity with fungicide before reconstruction. P100 respirators and disposable coveralls on every technician.
Mold Inspection
A full walkthrough of your Frisco home with a hygrometer, borescope, and FLIR camera. We check under sinks, behind baseboards, inside HVAC returns, and in the attic decking where roof leaks hide. You get photos, moisture readings, and a written scope the same day.
Mold Testing
Air sampling pumps and surface samples sent to an accredited lab, with results back in two to three days. We test before remediation to establish a baseline and after to confirm clearance. Useful when you are buying or selling a home in Frisco Lakes or Hollyhock.
HEPA Air Filtration
HEPA air scrubbers and negative air machines with HEPA-AIRE and Abatement Technologies units keep spores out of the rest of your house while we work. We run them continuously through removal and drying, then swap HEPA filter media before the final air sample.
Structural Drying & Dehumidification
Mold will not stay gone while framing is wet. We deploy Dri-Eaz and Phoenix Restoration Equipment dehumidifiers plus desiccant units to pull wall cavities and subfloors down to safe moisture content, logging readings daily until the structure is dry.
Mold Damage Repairs & Reconstruction
Once clearance passes, we replace what came out - mold-resistant drywall, baseboards, trim, and texture matched to your existing finish. One crew, one schedule, so you are not waiting weeks for a separate contractor to close the walls back up.
Mold Prevention & Moisture Control
We fix the conditions that grew the mold: vapor barriers in crawlspaces, attic ventilation corrections, bath fan upgrades, and humidity targets below 50 percent. Frisco's spring humidity and slab leaks both feed mold, so prevention is the cheapest repair you will ever buy.
Why Frisco homeowners call us for Mold Remediation
Certified, not self-taught
Our technicians hold IICRC AMRT, WRT, and ASD certifications, and larger losses get ACAC Council-certified Microbial Remediator oversight. We follow IICRC S520 and OSHA respiratory protection rules on every containment. That matters when your insurer or a buyer asks for documentation.
We find the water first
Mold returns when the moisture source is missed. We trace slab leaks, roof leaks, plumbing leaks, and condensation with Protimeter and Tramex meters plus a FLIR thermal camera before removal starts. Fixing the source is step one, not an upsell.
Clear pricing before we cut
You get a written scope and a flat price before containment goes up. Most single-room mold removal in Frisco runs $1,200 to $3,500 in 2026, and whole-home jobs with reconstruction land higher. No surprise line items after the drywall is open.
Nine years in Collin County
We have worked Frisco since 2017 - Panther Creek, Newman Village, Grayhawk, The Trails of Frisco, and the newer builds out toward Frisco Lakes. We know which neighborhoods flood, which attics sweat, and which builders used vapor barriers that fail.
Get a straight answer on your mold problem
Anyone can spray bleach on a wall. Proving the mold is gone takes equipment, certification, and paperwork. We bring all three to every Frisco job, and we tell you what we found before we start billing.
Book an inspectionHow our mold remediation process works
Inspect and test
We map moisture with meters and a thermal camera, then pull air and surface samples. You see the readings and photos before we quote anything.
Seal the area
We build a containment barrier system from 6-mil polyethylene sheeting and set negative air machines so spores cannot travel into clean rooms.
Remove and clean
Mold-contaminated drywall and porous materials come out in sealed bags. We HEPA-vacuum framing, then apply an EPA-approved antimicrobial cleaner and fungicide.
Dry the structure
Dri-Eaz and Phoenix dehumidifiers plus desiccant units run until wall cavities hit safe moisture content. We log hygrometer readings daily.
Verify and rebuild
Post-remediation air sampling confirms clearance, then we replace drywall, trim, and texture so your home looks finished, not patched.
Frisco mold problems we solve every week
Musty smell in a closet or hallway with no visible mold
That smell is usually microbial odor from growth inside a wall cavity or under carpet. We use a borescope and infrared thermal camera to find it, then contain and remove the affected material instead of masking it with fragrance.
Dark staining on baseboards after a slab leak
Slab leaks wick water up through the plate and into drywall. We stop the moisture, cut out mold-contaminated drywall to a clean line, treat the framing, and dry the cavity with dehumidifiers before reconstruction.
Attic mold from a roof leak or poor ventilation
North-facing roof decking in Frisco sweats in winter and bakes in summer. We remove moldy sheathing where needed, correct intake and exhaust ventilation, and treat the remaining structure with an EPA-approved antimicrobial.
Bathroom ceiling mold that keeps coming back
Recurring growth means the exhaust fan is undersized or ducted wrong. We remediate the ceiling, verify airflow, and upgrade the fan so humidity drops below 50 percent instead of cycling back into the drywall.
Mold found during a home sale inspection
We move fast on real estate timelines, produce lab results and a clearance report, and handle repairs so the deal closes. Buyers and agents get documentation they can hand to a lender.
Water intrusion after a storm that soaked carpet and padding
Carpet and pad that stayed wet past 48 hours almost always grow mold. We pull it, dry the subfloor with structural drying equipment, treat the slab, and rebuild once readings confirm it is dry.
Mold remediation across Frisco neighborhoods
Mold Remediation Coverage Across Frisco & Collin County
Routine and same-week appointments for residents and businesses across Collin County, including the ZIP codes below.
Mold Remediation Frisco TX questions, answered
These are the questions we get on almost every call. If yours is not here, call (469) 746-9038 and we will give you a straight answer.
How much does Mold Remediation cost in Frisco?
Most single-room jobs in Frisco run $1,200 to $3,500 in 2026, and whole-home projects with reconstruction typically land between $6,000 and $18,000. Price depends on square footage affected, how deep the moisture went, and whether drywall or cabinetry has to be rebuilt. We give you a flat written price after the inspection, before any containment goes up.
Who provides mold removal near me in Frisco?
Frisco Mold Shield provides mold removal in Frisco from our local base, covering Panther Creek, Grayhawk, Hollyhock, and every ZIP from 75033 to 75036. We are IICRC-certified with AMRT and WRT technicians on staff and have worked Collin County since 2017. Call (469) 746-9038 and we will schedule an inspection, often the same day.
Is emergency mold removal available in Frisco TX?
Yes. We answer calls 24/7 for water intrusion and active mold emergencies in Frisco, TX. If a supply line burst or a storm pushed water into your walls, we can be on site to stop the moisture, set containment, and start drying before mold spreads. The first 48 hours matter most, so call as soon as you find the water.
How do I choose a mold remediation company in Frisco?
Ask three things: are the technicians IICRC-certified, will they test before and after with lab results, and do they fix the water source instead of just spraying the mold. A legitimate mold remediation company in Frisco, TX will put the scope and price in writing and show you moisture readings. If a company skips testing or cannot explain containment, keep looking.
What is the difference between mold removal and Mold Remediation?
Mold removal means taking the visible growth out. Mold Remediation Frisco TX means removing the growth, fixing the moisture source, drying the structure to safe levels, and verifying with air sampling that spore counts are back to normal. Removal without remediation is why mold comes back a few months later. We do both, in that order.
Mold Remediation Frisco TX - get it handled today
Call (469) 746-9038 for a same-day inspection. We will show you the moisture readings, explain the scope, and give you a flat price before any work starts. Licensed, insured, and working Frisco since 2017.
Call nowContact Frisco Mold Shield
Monday - Friday: 8:00 AM - 6:00 PM
Saturday: 9:00 AM - 4:00 PM, Sunday: Closed - 24/7 emergency line for water intrusion